D-Link DWP-1010/KT Schnelle Installationsanleitung Seite 11

HARDWARE INSTALLATION
DWP-1010/KT DEVICE SETTINGS
5G/LTE signal strength reference information
RSRP – a measure of signal strength and has the following values:
more than -79 dBm signal strength very good
-80 dBm to -100 dBm signal strength good
-100 dBm to -110 dBm signal strength poor
less than -110 dBm signal strength very poor
RSRQ – a measure of connection quality and has the following values:
more than -9 dB indication very good
-10 dB to -15 dB indication good
-16 dB to -20 dB indication poor
less than -20 dB indication very poor
SINR – a measure of the quality of the usable signal about noise
interference and has the following values:
more than 21 dB very good
from 13 dB to 20 dB good
from 0 dB to 12 dB bad
less than 0 dB very bad
Connection signaling with LEDs in the DWP-1010/KT device
LEDs
LED connection indication (blue + green)
No signal
LTE / 3G
5G
LED signal strength (red + blue)
No signal
Weak signal
Average signal
Good signal
DWP-1010/K T
No LED indication
Steady green
Steady blue
Flashing red
Steady red
Flashing blue
Steady blue
11