ECOVACS ROBOTICS Deebot N79T Benutzerhandbuch Seite 25

No. Malfunction
DEEBOT will not clean
4 automatically at
scheduled time.
Remote Control failure
(effective control range
5
of Remote Control
5m (16').
ECOVRCS
R O
Possible Causes
Tme Scheduling function is
cancelled.
DEEBOT is powered OFF.
The robot's battery is low.
The robot's components are
tangled with debris.
The batteries in the
Control need to be replaced.
DEEBOT is powered OFF or
DEEBOT's battery is low.
The infrared signal cannot
be transmitted because
is
Infrared Emitter on the
Remote Control or
DEEBOT's Infrared
on DEEBOT is dirty.
There is other equipment
interfering with the infrared
signal to DEEBOT.
a OTICS
5. Troubleshooting
Set Time Scheduling function as
described in section
Power ON
Keep DEEBOT powered ON and on
the Charging Dock to make sure it has
a full battery to work at any time.
Power OFF DEEBOT,
Bin, and invert the robot. Clean Side
Brushes and the
described in section
Remote Replace with new batteries making
sure they are installed correctly.
Make sure DEEBOT is powered ON
and fully charged.
the Use a dry cloth or the Multi-Function
Cleaning Tool to wipe the Infrared
Emitter on Remote
Receiver Infrared Receiver
Avoid using the Remote Control near
other equipment using infrared
signals.
Solutions
3.4.
DEEBOT.
clean the Dust
Main Brush as
4.
Control and the
on DEEBOT.
25
EN