ECOVACS ROBOTICS Deebot N79T Benutzerhandbuch Seite 12

3. Operating
3.2 Quick
Charging
Connect the Power Adapter
Place the Charging
to the ground. Keep the immediate area 2m (6.6') in front of the charger and 1 m (3.3') on both
sides of the charger clear of objects and reflective surfaces.
Plug the Charging Dock in. The Power Indicator Light on the Charging Dock glows.
a Install Side Brushes
Attach Side
DEEBOT by pressing a brush into each
slot until it clicks.
Power ON
Turn the robot's
the ON position. "l" indicates
indicates OFF. DEEBOT is powered
when
BLUE.
* When DEEBOT is not cleaning, it is suggested to keep it powered ON and charging instead
of powered
12
EN
and Programming
Start
Dock Placement
to the Charging
Dock on a level floor surface
Brushes to the bottom
Side Power Switch
ON and "O"
button glows a continuous
OFF.
ECOVRCS
ROaOTlCS
Dock.
against the wall with the base perpendicular
of
to
ON
ON