LaserLiner MultiMeter-PocketBox Bedienungsanleitung Seite 12

Fuse
Voltage measurement DC/AC
2
To take a voltage measurement, turn the
rotary switch to position „
Then connect the measuring contacts to
the object to be tested. The measured
value acquired and the polarity appear on
the display.
Voltage measurement AC
3
To take a voltage measurement, turn the
rotary switch to position „
Then connect the measuring contacts to
the object to be tested. The measured
value acquired and the polarity appear on
the display.
12
EN
Do not touch the green
pc-board. Also make sure
it is kept clean.
2 x LR44 1,5V button cell
ANSI/NEDA 1166A
black
".
black
".
red
red