Parkside PSSFS 3 A2 Bedienungs- Und Sicherheitshinweise Seite 18

Do not dismantle the product!
The product must be protected against contamination and
damaging of the housing surface .
˜ Before use
Check the consignment for completeness and for signs of visible
o
damage . If any damage is found, the product must not be used .
Remove all packaging material from the product .
o
˜ Use
˜ Testing the socket wiring
1 . Plug the product into the shockproof socket to be tested .
2 . The 3 combined LED indicators N
indicate the test result:
N PE
1 ] [
18 GB
Test result
L
2 ] [ 3 ] [
CORRECT RCD test
CORRECT Please reverse
= on/ = off
, PE and L
1 ] [ 2 ] [ 3 ] [