General Assembly And Safety Information - BRAWA G 4/5 Betriebsanleitung

Description
General assembly and safty information .............................................. 3
Work to be performed before starting up
• Removing the locomotive from the packaging ................................. 4
• Fitting additional parts .................................................................... 4
• Special tool ..................................................................................... 5
Maintenance work
Locomotive
• 1. Lubricating ............................................................................. 10
• 2. Dismantling housing ............................................................... 10
• 3. Exchanging the engine .......................................................... 10
• 4. Light fittings ........................................................................... 10
• 5. Maintenance work on wheelsets, gears,
and coupling rods .................................................................. 10
• 6. Exchanging the coupler pocket ............................................. 10
• 7. Exchanging the traction tires ................................................. 10
Tender
• 8. Dismantling housing ............................................................... 12
• 9. Disconnect the tender from the locomotive .......................... 12
• 10. Replace/exchanging the circuit board ................................... 12
• 11. Dismantle the cable harness coupling ................................... 12
• 12. Maintenance work on wheelsets ........................................... 12
• 13. Exchanging the coupler pocket ............................................. 12
• 14. Exchanging the sliding contact of the AC version ................. 10
• 15. Exchanging the premium digital decoder .............................. 12
• 16. Digital operation ..................................................................... 12
Spare parts list .................................................................................. 14
Order notice
• Order example .............................................................................. 22

General assembly and safety information

• These operating instructions describe all work steps necessary for
maintenance and repair. Please read these operating instructions
carefully before you start with your work.
• In the case of incorrect handling of electrical components, they may
be destroyed. Please ask your specialist dealer to help with the
necessary work (e.g. changing circuit boards).
• In the case of maintenance work, the disassembly is described
below, to re-assemble the tractor reverse the work steps.
• The maintenance work described below is virtually identical
for direct current and alternating current models. If there are
any differences these will be pointed out specifically.
• When dismantling the locomotive make a note of the mounted
position of the individual parts. An incorrectly mounted part can
be destroyed or operation can be disrupted.
• All cables and connection wires installed in this product may not be
inserted in a mains socket. Danger!
3
Page