Changing The Preset Temperature; Setting The Preset Time - Sentiotec Pro B2 Gebrauchsanweisung

Instructions for use for the user

9.5. Changing the preset temperature

You can change the preset temperature during operation any time.
● Turn the temperature selector
Turn the temperature selector
► The temperature selector
in the temperature display
► Then the current temperature in the sauna room is displayed again in the
temperature display
is displayed.

9.6. Setting the preset time

You can set the preset time in 15 minute intervals. The maximum preset time
totals 24 hours. The preset time is shown in hours and minutes, e.g. 8 hours and
WARNING!
Risk of ire
Flammable objects that are placed on the heater will ignite and cause ires.
● NEVER place lammable objects on the sauna heater.
● Make sure that NO lammable objects have been placed on the sauna
heater before you activate the preset timer function.
15 minutes is shown as 8.15.
1. Start the sauna heater (see point 9.4. Starting the sauna on page 25).
2. Press the preset time button
► The temperature selector
is shown in the temperature display
3. Press the preset time button
intervals.
4. Once you have reached the required preset time, wait a few seconds.
► The sauna control unit changes to standby mode and the timer starts
running.
► The remaining preset time is shown in the temperature display
The temperature selector
minutes lash.
► Once the preset time has elapsed, the sauna heater switches on.
WORLD OF WELLNESS
2
to the right to increase the temperature.
2
to the left to decrease the temperature.
lashes and the preset temperature is shown
2
3
.
3
. In single-sensor mode, the preset temperature
6
.
lashes and the previously set preset time
2
3
6
, to increase the preset time in 15 minute
2
and the point between the hours and
.
p. 26/30
3
.