Cleaning, Replacing The Diaphragm - Zodiac T5 Duo Handbuch

7 / Cleaning, replacing the Diaphragm

Figure 16
2 2
Cleaning the Diaphragm
If the cleaner stops, check the diaphragm for blockage.
•
Turn cleaner over
•
Inspect diaphragm and push through debris or obstacles
to clear.
If not blocked, check the diaphragm for wear or damage.
Removing the Diaphragm
•
Unscrew the casing
•
Unscrew the handle
remove the diaphragm
•
Check the diaphragm for possible traces of wear and rinse profusely
with water. If necessary replace with a new diaphragm.
Figure 17
Figure 19
Handle
(Figure 16).
(Figures 17 and 18).
(Figure 19), release the inner tube then
(Figure 20).
Figure 18
Figure 20
Casing