Zodiac T5 Duo Handbuch Seite 22

Figure 23
Nut
Upper ring
Outer tube
Figure 24
Figure 25
2 3
Reassembling the Diaphragm
•
Insert the diaphragm back on the inner tube.
•
Insert the diaphragm/inner tube assembly into the upper part of
the cassette. Align the stop markers on the diaphragm with
the notches and pull gently on the inner tube (without twisting)
until the edge of the diaphragm becomes visible
Figure 21
Upper part of the cassette
•
Screw the handle back onto the upper part of the cassette.
•
Assemble the casing then slide the ring and the nut onto
the handle (Figure
•
Insert the engine into the body and thread the handnut
down tight (Figure
•
Make sure the extension tube swivels freely by spinning it
(Figure 25).
Figure 22
Notch
Stop
23).
24).
(Figures 21 and 22).
Edge of the Diaphragm