Hose And Cleaner Assembly - Zodiac T5 Duo Handbuch

5 / Hose and cleaner assembly

Figure 12
Figure 13
Figure 14
incorrect
2 0
•
Immerse the hose and the cleaner and assemble the elements
underwater.
•
Fit the assembled hose
the hose) with the quick connection fitting
To assemble them correctly make a quarter turn and position
the tabs in one of the slots. You do not need to fit the tab in the
last housing when using the cleaner at first.
•
If needed; if you have ladders or areas that might jam
your cleaner, clip the non blocking wheel to the end of the hose
(Figure 12).
•
Then clip the assembly to the cleaner nozzle
•
A counter-weight is supplied to be used when the T5 Duo
tends to rise from the bottom of the pool
Fit the counterweight to the end of the first hose section at about
1 metre from the appliance
the disk remains on the bottom of the pool when the appliance
is operating.
correct incorrect
(see paragraph 2 page 16
(Figure
(Figure
(Figure 15) then make sure that
Figure 15
: fitting
12).
(Figure 13).
14).