Indicator Lights; Receive An Alert At The End Of The Cycle Via The Iaqualink App - Zodiac Freerider RF 5400 IQ Kurz- Oder Schnellstartanleitung

Indicator lights

Charged:
Steady
Ready for use
green
On charge:
Flashing
Ready for use
green
Partially charged:
Steady
Can be used
orange (the cycle may be shorter)
If the cleaner is placed on the charging
station: On charge
Flashing
If the cleaner is not placed on the
orange
charging station:
and cannot be used
Battery Error
(Refer to the full user
Flashing
manual available online,
red
Troubleshooting.)
Flashing
Ready to be immersed
blue
Steady
Cycle in progress
blue
Cleaner error
Flashing
manual available online,
red
Troubleshooting)
Not connected to the Wi-Fi
Off
Flashing
Pairing in progress
blue
Steady
Connected to the Wi-Fi
blue
•
When all of the indicators are off, the cleaner is on
standby. Slide the cursor to the left or right to wake it up.
If this has no effect, put the cleaner back on the charging
station.
Connect the cleaner to the iAquaLink app
to take advantage of even more functions (Waterline
and Smart modes, end-of-cycle alert, state of charge,
Requires charging
1
Download the iAquaLink app from Play Store
or Apple Store.
2
Open the app and create an account (for first-
time users) or log in.
(Refer to the full user
3
In the app, press
instructions to pair your cleaner.
4
Check that the
•
The Wi-Fi signal may not be strong enough where you have installed the charging station. Try to connect from a
location closer to your router or install a range extender.
Taking the extra step
automatic remote updates, etc.)
and follow the
indicator is steadily lit.
Receive an alert at the end of the cycle
via the iAquaLink app
The app sends an alert at the end of
1
the cycle (except "Floor only"): from this
point, the cleaner waits 30 seconds at
the top of each of the different walls
(one after the other) for 10 minutes.
Completely remove the cleaner
2
from the water by the handle.