I Removing Debris From The Motor; I Replacing The Tracks - Zodiac MX6 Montage- Und Gebrauchsanleitung

4.3 I Removing debris from the motor

Before starting this operation and to avoid serious injury:
• Turn off the filtration pump.
• Disconnect the cleaner from the Twist Lock hose assembly.
• Press the button on the top and lift the lid (see image
• Remove the debris inside (see image
• If necessary, gently push the motor blades forward and backward to reveal any trapped debris and remove it. When
you move the blades, make sure that the cleaner's tracks turn freely and that they are correctly synchronised with the
movement of the blades under the cleaner.
• Also remove any debris which may be caught in the suction inlet.
• Close the lid and make sure it locks.

4.4 I Replacing the tracks

• Lay the cleaner on one side.
• Starting with one of the wheels, pull the inside of the track to separate it from the wheel
the track from the cleaner.
• To install the new track, position the inside of the track on the small wheel's grooves and on one of the large wheels.
• Stretch the track around the second wheel,
wheel grooves. Make sure that the track passes under the guide.
).
) and also under the cleaner (see image
(see image ). Press down on the track to position it correctly on the
).
(see image ). Then remove
EN
12