Auriol 4-LD5832-1-2 Bedienungs- Und Sicherheitshinweise Seite 128

The alarm feature does not have to be re-enabled.
The alarm signal will automatically switch back on again at the
set
time the next day.
Snooze function (SNOOZE)
 When the alarm signal sounds, press the
SNOOZE/LIGHT button (2) to temporarily disable
Z
the alarm. "Z " will flash in the display to the left of the
alarm time for the Alarm 1 or 2 indicator (17) or (4). The alarm
will sound again after 5 minutes.
 Press any button except the SNOOZE/LIGHT button (2) to
switch off the alarm.
Battery Level Indicator
If the batteries get too low to keep the device, outdoor sensor and
data transmission in operation, the battery level indicator will
appear in the display to the left of the room temperature
indicator (7) or the outside temperature indicator (14). The
batteries in all devices should be replaced as soon as possible.
Reset (reset to factory setting)
Use a thin, blunt object to press the button in the hole next to
RESET (21) on the back of the device. All settings will be deleted
and the device will restart.
- 126 -