Auriol 4-LD5832-1-2 Bedienungs- Und Sicherheitshinweise Seite 127

Setting the alarms
 In the normal setting, press and hold the Alarm 1 SET button
(13) or the Alarm 2 SET button (9). The hours will flash, and
these can be set using the +/MAX/MIN/UP button
the Radio Restart/Down button (12).
 Confirm your entry by pressing the Alarm 1 SET button (13) or
the Alarm 2 SET button (9). The minutes will flash, and these
can be set using the +/MAX/MIN/UP button
Radio Restart/Down button (12).
 Press the Alarm 1 SET button (13) or the Alarm 2 SET button (9)
to confirm your entry and exit the settings mode.
Enabling and disabling the alarms
 Press down the Alarm 1 ON/OFF button (1) or the Alarm 1
ON/OFF button (3) to enable Alarm 1 or Alarm 2. The
symbol will appear in the corresponding Alarm 1 indicator
(17) and/or Alarm 2 indicator (4), indicating that the alarm is
enabled.
 Push up the Alarm 1 ON/OFF button (1) or the Alarm 2
ON/OFF button (3) to disable Alarm 1 or Alarm 2. In the
corresponding Alarm 1 indicator (17) and/or Alarm 2
indicator (4), the or
the alarm has been disabled.
Switching off the alarm signal
The alarm signal will sound at the set time for approx. 2 minutes,
with the tone increasing every 10 seconds.
 Press any button except the SNOOZE/LIGHT button (2) to
switch off the alarm signal.
10)
(
or the
10)
(
symbol will go out, indicating that
- 125 -
or
or