Electric Connections; Assembly Of Machine - Texas A/S Power Split 700 H Bedienungsanleitung

Warning : As with all machinery, there are certain hazards involved with the operation and
use. Exercising respect and caution will lessen the risk of personal injury considerably.
However, if normal safety precautions are overlooked or ignored it might result in personal
injury to the operator or damage of property.

Electric connections

Connect the main lead to a standard electric outlet, which equals the specification listed on
the type tag/name plate.
Extension cords
If an extension cord is to be used, it is recommended to use waterproof plugs and avoid
contact with water.
Since the cable will produce a voltage drop, that will prevent the engine from supplying full
power and reduce the machine's function, it is essential that the conductors in the cable
conform the following specifications.
0-20 meters – diameter of conductor – 1,5 mm
Never use extension cords which are more than 20 meters long.
If any doubts please consult a qualified electrician. Do not attempt any electrical repairs
yourself.

Assembly of machine

Remove all components from the packing case, make sure each log splitter is packed in
one carton and place the components neatly so that they may be identified and checked
for any possible damage during transit. Should any component be found damaged, please
contact your Texas dealer immediately.
Fig. 1 Display of main components
Check all components with reference to the following list
B.
C.
D.
E.
2.
A.
F. G. I.
www.texas.dk
J.
K.
H.
13