Herunterladen Inhalt Inhalt Diese Seite drucken

Gastroback DESIGN WAFFELEISEN ADVANCED EL Bedienungsanleitung Seite 31

Vorschau ausblenden Andere Handbücher für DESIGN WAFFELEISEN ADVANCED EL:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

handle, attachment, or the control panel. Do not touch the heating surface.
Connect the appliance directly to a separately protected mains power supply wall
socket with protective conductor (earth/ground; 220/240 V, 50 - 60 Hz, AC, rated
for 16 A).
The netindicatorlight will turn on as soon as the plug is connected to the power out-
let.
1. Place the waffle maker on a dry, stable countertop or other surface where you will
be using it. Then turn the handle onto the shaft.
2. Plug into a 220 - 240 volt outlet. The red power light will
go on, indicating that the waffle maker has power and is
ready to begin preheating. The red power light will remain
on until you unplug the unit.
3. Push the toggle switch to on to begin the preheating pro-
cess. The LED background displays blue and shows a default
cooking time of 2:30.
4. When the blue ready light is on and 3 beeps sound, pre-
heating is finished. At that moment, one black point will be
flashing in the LED display and a blue light illuminates under
the colour button.
5. Before making the first waffle, use a pastry brush to lightly
coat the top and bottom waffle grids with vegetable oil or
melted shortening. Cooking spray will also work well for this
purpose.
6. Ladle enough batter to fill the lower waffle plate so that the
peak areas of the plate are just barely covered. If necessary,
use a spatula to spread the batter into the corners of grid.
7. Press the colour button to adjust the cooking time in 30
second increments from 2:30 (lightest) to 4:00 (darkest) (see:
pic. D). If you want a crispier waffle for any cooking time set-
ting, press the crisp button and a blue light illuminates under
the crisp button.
8. Close the baker lid. Rotate the housing 180° clockwise.
Press the start button; the blue ready light will be off and the
baking timer begins its countdown. While baking, the black
point in LED display will stop flashing. If you want to change
the time setting, you can press reset button and then colour
button to reset the time. Then press start button to begin the
cooking time countdown again.
31

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

42419

Inhaltsverzeichnis