VEVOR RP8626 Bedienungsanleitung Seite 24

D. Nozzle Spray Tip
5. Use the Nozzle Spray Tip to install the Metal Seatwith Rubber Gasket into the
Nozzle Tip Guard.
6. Install the Nozzle Spray Tip into the Nozzle Tip Guard.
7. Thread the Nozzle Tip Guard Retaining Nut onto the front of the upper spray
gun body and tighten with a wrench.
8. With the unit unplugged, uncoil and connect the High-Pressure Paint Hose (M)
to the Output Port(E). Use a wrench to correctly tighten the fitting.
- 23 -