Cleaning And Maintenance - Royal Catering Rcsl 2/12A Bedienungsanleitung

• For changing a parameter press POWER/+ (increases value) or LIGHT/-
(decreases value)
• NOTE: Parameters P3 and F3 are unused in 3/12A model.
• When the failure code "LL" occurs on the display - the temperature sensor
without connection.
• When the failure code "HH" occurs on the display - the temperature sensor
short circuited.
3.3.7 Slush consistency adjustment
Behind the driveline od each tank is a small bolt for ice-slush consistency
•
adjustment that controls the mechanism for ice build:
• IMPORTANT: do not adjust it in normal operating conditions, it is mostly for
service use.
3.4.

Cleaning and maintenance

a) Unplug the mains plug and allow the device to cool completely before each
cleaning, adjustment or replacement of accessories, or if the device is not
being used.
value of the right cylinder (Note: not used
in 3/12A model)
EN