Silvercrest SHBR 7.2 A1 Kurzanleitung Seite 8

Switched-mode electrical power supply
S
A switched-mode power supply converts an unstable input voltage to a
constant output voltage.
CE labelling
Products that feature this symbol meet the requirements of the EU direc-
tives (see section entitled "EU Declaration of Conformity").
Tested safety: Products that feature this symbol meet the requirements of
the German Product Safety Act.
Symbol for alternating current (AC)
Symbol for direct current (DC)
The mains adapter is protected according to DIN EN 60529:
• against access to hazardous parts by fingers.
IP20
• against intrusion of solid foreign objects with a diameter of 12.5 mm
or larger.
The mains adapter is not waterproof.
The mains adapter can be used at ambient temperatures of up to
ta=40°
40 °C.
The appliance housing is protected according to DIN EN 60529:
IPX4
• Protection against splashing water on all sides
Only use the mains adapter that has been supplied
This symbol means that the mains power adapter must no longer be
used if the plug or plug contacts are damaged.
Dispose of the appliance in compliance with environmental regulations Dispose of the appliance in compliance with environmental regulations
(see "Disposal") (see "Disposal")
Packaging material label regarding waste separation
Label includes abbreviations (a) and numbers (b) with the following Label includes abbreviations (a) and numbers (b) with the following
meaning: 1–7: plastics/20–22: paper and cardboard/80–98: com- meaning: 1–7: plastics/20–22: paper and cardboard/80–98: com-
posite materials. posite materials.
Dispose of packaging in compliance with environmental regulations
(see section "Disposal")
8 - English