Safety Instructions For Reciprocating Saws - Parkside Pasa 20-Li C2 Bedienungsanleitung Und Originalbetriebsanleitung

h) Keep handles and grasping
surfaces dry, clean and free from
oil and grease. Slippery handles
and grasping surfaces do not allow for
safe handling and control of the tool in
unexpected situations .
Battery tool use and care
a) Recharge only with the charger
specified by the manufacturer. A
charger that is suitable for one type of
battery pack may create a risk of fire when
used with another battery pack .
b) Use power tools only with
specifically designated battery
packs. Use of any other battery packs
may create a risk of injury and fire .
c) When battery pack is not in use,
keep it away from other metal
objects, like paper clips, coins,
keys, nails, screws or other small
metal objects, that can make a
connection from one terminal to
another. Shorting the battery terminals
together may cause burns or a fire .
d) Under abusive conditions,
liquid may be ejected from the
battery; avoid contact. If contact
accidentally occurs, flush with
water. If liquid contacts eyes,
additionally seek medical help.
Liquid ejected from the battery may cause
irritation or burns .
e) Do not use a battery pack for
tool that is damaged or modified.
Damaged or modified batteries exhibit
unpredictable behaviour resulting in fire,
explosion or risk of injury .
f) Do not expose a battery pack
or tool to fire or excessive
temperature. Exposure to fire or
temperature above 130 °C may cause
explosion .
12 GB
g) Follow all charging instructions and
do not charge the battery pack
or tool outside the temperature
range specified in the instructions.
Charging improperly or at temperatures
outside the specified range may damage
the battery and increase the risk of the fire .
CAUTION! RISK OF
EXPLOSION! Never charge
non‑rechargeable batteries!
Protect the rechargeable
max . 50 °C battery from heat, for
example from continuous
exposure to sunlight, fire,
water and moisture. There is a
risk of explosion .
Service
a) Have your power tool serviced
by a qualified repair person using
only identical replacement parts.
This will ensure that the safety of the power
tool is maintained .
b) Never service damaged battery
packs. Service of battery packs should be
only be performed by the manufactured or
authorized service providers .
˜ Safety instructions for
reciprocating saws
a) Hold the power tool by insulated
gripping surfaces, when
performing an operation where
the cutting accessory may contact
hidden wiring or its own cord.
Cutting accessory contacting a "live"
wire may make exposed metal parts of
the power tool "live" and could give the
operator an electric shock .