List Of Components - Clearaudio azimuth optimizer Bedienungsanleitung

User manual / Bedienungsanleitung

1. List of components

The Clearaudio azimuth optimizer
gned for this product. We recommend you store this original packing and to use this packing in case
of any transportation. Please check if the parts listed below have been enclosed:
azimuth optimizer
1.
2. Power supply
Power supply adaptors (1x US, 1x
3.
UK, 1 Europe)
Phonostages are devices designed to provide a very high level of amplification. This is necessary
because the electrical signal generated by a phono cartridge is extremely low (usually less than one-
thousandth of a volt). The job of the phonostage is therefore to accurately equalise the phono signal
and boost it to line level (measured in volts).
However, phonostages are by nature extremely sensitive, which leads to the potential problem that
high-frequency interference may also be amplified to a point at which it becomes noticeable.
Unfortunately it is not possible to completely protect the sensitive phonostage circuitry from this in-
terference without degrading its high fidelity performance. Therefore care must be taken to position
the phonostage away from sources of high frequency interference such as mobile phones, modems
and powerline communication systems (PLC) in which data is sent over the mains power network.
4
has left our factory in safe packing that has been specially desi-
unit
4.
5.
6.
Clearaudio azimuth optimizer test
record
User manual
Warranty & Registration Card
© clearaudio electronic GmbH, 2017/11