Charging - Philips FC9910 Bedienungsanleitung

5.3 Charging

Your homeRun can be charged in two ways:
• On the base station either manually or
automatically during use;
•
By connecting the robot directly to the mains.
Note:
D
When fully charged, your homeRun can clean
cordlessly for up to 100 minutes. When the
rechargeable battery is empty, charging your
homeRun takes up to 3 hours.
5.3.1 Charging: manually on the base station
To charge your homeRun, for instance before
1
first use or when the rechargeable battery
is completely empty after a long period
of nonuse, place it on the plugged-in base
station (1). The charging light on the base
station starts to flash green when the robot is
positioned on the base station correctly (2).
Note:
D
Make sure the charging terminals on the bottom
of the robot are in contact with the charging
terminals on the base station.
When the rechargeable battery is fully
2
charged, the charging light on the base station
lights up green continuously.
5.3.2 Charging: automatically during use
When your HomeRun has finished cleaning
1
or when only 15% of the battery power
remains, it automatically returns to the base
station to recharge. When the robot returns
to the base station, the text 'bASE' is shown
on the display.
When the robot is positioned correctly on
2
the base station, the charging light on the
base station starts to flash green (1) and the
battery level/charging indication flashes on
the display (2).
When the rechargeable battery is fully
3
charged, the battery level/charging indication
on the display lights up continuously and the
charging light on the base station lights up
green continuously.
Note:
D
The robot only returns to the base station
automatically when it started cleaning from
the base station.
Note:
D
If the rechargeable battery runs low while the
robot is cleaning in AUTO or CLIMB cleaning
mode and has not yet finished, it goes back to
the base station to recharge. Once fully charged,
it resumes cleaning on the place where it left off.
When the robot is charging, the cleaning mode
indication on the display flashes to indicate that
the robot has not yet finished cleaning.
15