Dust Container - Philips FC9910 Bedienungsanleitung

2.3.4 Remote control
1 POWER button 3
• Press to switch on, to stop cleaning and to
switch to standby mode.
2 TURBO button
• Press to switch the TURBO function on
or off.
3 CLOCK button
• Press to set the clock time.
4 - and + buttons
• Press to move time backward or forward.
5 ENTER button
• Press to confirm a selection.
6 Direction selector
• Press to drive the robot in manual mode.
7 MODE button
• Press to switch between cleaning modes.
8 TIMER button
• Press to set the timer.
9 BASE button
• Press to make the robot return to its
base station.
10 Start/pause button
• Press to start cleaning and to stop
cleaning briefly.
11 Battery compartment
12 Battery compartment lid (Fig. 11)

2.3.5 Dust container

1 Dust container handle
2 Filter holder
3 Exhaust filter
4 Mesh filter
5 Latch (Fig. 12)
2.3.6 Base station
1 Infrared signal generator
2 Infrared signal emitter
3 Charging light
4 Charging terminals
5 Socket for small plug
6 Cord feed-through opening
7 Cord storage reel
8 Small plug
9 Adapter
10 Mains cord with mains plug
8