Setting The Clock Time - Philips FC9910 Bedienungsanleitung

5.3.3 Charging by connecting the robot to
the mains
Insert the small plug of the adapter into
1
the socket for the small plug on the robot
(1). Insert the mains cord into the adapter
and insert the mains plug into a wall socket (2).
When the robot is connected to the mains
2
correctly, the battery level/charging indication
flashes on the display.
When the battery is fully charged, the battery
3
level/charging indication on the display lights
up continuously.

5.4 Setting the clock time

The clock time has to be set with the remote
control. The homeRun uses the 12-hour clock
format. When AM lights up on the display, the
time shown is a time between midnight and
midday. When PM lights up, the time shown is
a time between midday and midnight.
Press the CLOCK button on the remote control
1
(1). The hour indication starts to flash (2).
Use the + and - buttons on the remote
2
control to set the hour (1). The set hour
appears on the display (2).
16
Press the ENTER button on the remote
3
control to confirm (1). The minutes indication
appears on the display (2).
Use the + and - buttons on the remote
4
control to set the minutes (1). The set minutes
appear on the display (2).
Press the ENTER button on the remote
5
control to confirm (1). The set clock time
appears on the display (2).