Charging The Appliance - Philips Jack HR6071 Gebrauchsanweisung

C
The crevice tool, floor nozzle and the stick
can be attached to the wall holder by pushing
them into the appropriate fastening slots.

Charging the appliance

1 Make sure that the slide switch of the
vacuum cleaner is in the off position (0)
during charging.The appliance will not
charge if the slide switch is in another
position.
2 Insert the charger plug into the wall
socket.
C
3 Always put the vacuum cleaner back onto
the holder after use to recharge the
batteries, even if the batteries are still
almost fully charged.
C
The indicator light will come on to indicate
that the appliance is charging.
The indicator light will stay on as long as the
appliance is connected to the wall holder and the
plug is in the wall socket.
The indicator light does not give any information
about the charge level of the built-in batteries.
Charge the appliance for at least 16 hours before
you use it for the first time.
Recharge the appliance as soon as the motor
power decreases noticeably.
ENGLISH
7