Saeco Intelia Deluxe HD8906 Bedienungsanleitung Seite 9

AQUACLEAN
AQUA
FILTER?
CLEAN
AQUA
INSTALL
CLEAN
FILTER
6 Open the lid of the bean hopper. Fill the bean hopper with coffee beans
and close the lid.
7 Insert mains plug into a wall socket (1) and insert the small plug into the
socket located on the back of the machine (2).
8 Place a container under the hot water and coffee dispensing spouts.
Check if the hot water dispensing spout is installed correctly.
9 Press the standby button to switch on the machine.
10 Press the OK button to start the automatic circuit priming cycle.
11 The machine heats up and the display shows the temperature icon.
- The machine starts rinsing water through the coffee dispensing spout.
The display shows the rinsing icon and a progress bar.
12 The display shows the following icon to indicate you have to install the
AquaClean filter.
If you want to install the AquaClean filter afterwards, press the ESC
button and continue with the manual rinsing cycle. For installation, see
chapter 'AquaClean filter'.
13 Press the OK button. The display shows the following icon.
14 Remove the AquaClean filter from its packaging. Shake the filter for about
5 seconds.
English
9