Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
LEAKSHIELD
17.3.
17.3. Profile configuration
17.3.
17.3.
Profile configuration
Profile configuration
Profile configuration
All configuration changes are automatically stored in the currently active profile.
The current configuration can also be stored in any other profile by clicking the
corresponding button.
18.
18. System settings
System settings
18.
18.
System settings
System settings
Select "System" from the device list below the "LEAKSHIELD" entry.
18.1.
18.1. Device information
Device information
18.1.
18.1.
Device information
Device information
The details displayed here might be required when you contact our service for sup-
port. You may enter a "Device description" for easier identification, this text will be
displayed in the device list and in the data quick view.
A maintenance indicator is also shown. If this indicator has reached 0%, mainte-
nance by Aqua Computer with replacement of the vacuum pump and valves is
necessary.
18.2.
18.2.
18.2.
18.2. Device settings
Device settings
Device settings
Device settings
After pressing the "Reset device to factory settings" button or the corresponding
menu item, the default values are loaded. The device must then be completely re-
configured!
The settings can also be exported and imported in this section. The Pump runtime
diagram can be deleted by clicking on the corresponding item.
18.3.
18.3. Time settings
Time settings
18.3.
18.3.
Time settings
Time settings
For the internal clock in LEAKSHIELD, the time zone can be selected here and the
device time can be updated from the PC. In addition, the date and time format
can be set.
Note: LEAKSHIELD does not have a clock buffered by a battery. After a power fail-
ure, the time must be reset.
18.4.
18.4.
18.4.
18.4. Standby behavior
Standby behavior
Standby behavior
Standby behavior
The settings for the standby behavior determine at which USB operating states the
LEAKSHIELD switches to standby mode. Depending on the configuration, the dis-
play, the alarm evaluation and the lighting can be deactivated in standby.
- 28 -
Aqua Computer GmbH & Co. KG
Gelliehäuser Str. 1, 37130 Gleichen
aqua
computer
© 2021-2024
Werbung
Inhaltsverzeichnis
