Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
aqua
computer
12.3. Volume change
12.3.
12.3.
12.3.
Volume change
Volume change
Volume change
The third displayed sensor provides information about the volume change in ml/h.
This value can give you information about smaller leakages. However, this value
also changes when the temperature of your system changes.
12.4.
12.4. Pressure change
Pressure change
12.4.
12.4.
Pressure change
Pressure change
The fourth displayed sensor provides similar information as the volume change
value, but here the pressure change is given in mbar per minute.
12.5. Pump speed
12.5.
12.5.
12.5.
Pump speed
Pump speed
Pump speed
The fifth displayed sensor shows the current pump speed (if available). This value is
transmitted via USB from the Aqua Computer background service to LEAKSHIELD.
You can customize the sensor name and log interval.
In the configuration you can also view the settings of the wizard for the "Pump"
area and change them directly. You can find more information about the details in
chapter 10.1 (Pump). However, we recommend to make the settings only using the
wizard.
12.6.
12.6. Flow
Flow
12.6.
12.6.
Flow
Flow
The sixth sensor displayed is the flow measurement value of your system (if avail-
able). This value is transmitted via USB from the Aqua Computer background ser-
vice to LEAKSHIELD.
In the configuration, you also have direct access to the settings made in the wizard
in the "Flow" area. In addition, you can adjust the sensor name and the log inter-
val.
You can find more information about the details in chapter 11.1 (Flow). We rec-
ommend that you only make the settings using the wizard.
12.7. Software sensors
12.7.
Software sensors
12.7.
12.7.
Software sensors
Software sensors
The last twelve sensors in the list are software sensors and can be used to transmit
sensor data that is not physically available to LEAKSHIELD from the computer by
USB connection.
Select the appropriate unit for each configured data source. For manipulation of
the displayed sensor value, a scale factor and an offset may be configured. Data
from third party software regularly requires the scale factor to be adjusted.
Transmission of sensor data via USB interface
During installation of the aquasuite, the background service "Aqua Computer Ser-
vice" is also installed. This service supplies various data from PC components and
imported data from aquasuite web, additionally sensor data provided by third par-
© 2021-2024
Aqua Computer GmbH & Co. KG
Gelliehäuser Str. 1, 37130 Gleichen
LEAKSHIELD
- 21 -
Werbung
Inhaltsverzeichnis
