Linak Desk Frame 2 Montageanleitung Seite 13

DF2 | 13
comply with the following parts of the Machinery Directive 2006/42/EC, ANNEX I, Essential health and
safety requirements relating to the design and construction of machinery:
1.1.2 a) Fitted for function and foreseeable misuse*
1.1.2 b) Selection of the most appropriate methods*
1.1.2 c) Foreseeable misuse*
1.2.1 Safety and reliability of control systems
1.2.2 Control devices. Shape, readability, overview*
1.2.3 Starting*
1.2.4.1 Normal Stop*
1.3.1 Risk of loss of stability
1.3.2 Risk of break-up during operation
1.3.3 Risk due to falling or ejected objects*
1.3.4 Risk due to surface, edges or angles*
1.3.7 Risk related to moving parts*
1.3.8 Choice of protection against risks arising from moving parts
1.5.1 Electricity supply
1.5.5 Extreme temperatures
1.5.6 Fire
1.5.10 Radiation. EMC. Emission of electromagnetic radiation, X-rays, -rays*
1.5.11 External radiation*
1.7.1 Information and warnings on machinery*
1.7.3 Marking of machinery*
*need to be further evaluated in the end product
We confirm that prior to market introduction the relevant technical documentation is compiled in
accordance with part B of Annex VII and the assembly instruction pursuant to Annex VI.
This documentation or part hereof will be transmitted by post or electronically to a reasoned request by
the national authorities
The products mentioned in this document are to be combined for use in height adjustable furniture.
This partly completed machinery must not be put into service until the final machinery into
which it is to be incorporated has been declared in conformity with the provisions of the
Machinery Directive 2006/42/EC where appropriate.
Nordborg, 2024-01-26