Introduction; Features; Safety Instructions - Omnitronic BPM-6 Beatcounter Bedienungsanleitung

BPM-6 Beatcounter
For your own safety, please read this user manual carefully
All persons involved in the installation, operation and maintenance of this device have to:
- be qualified
- follow the instructions of this manual

1. INTRODUCTION

Thank you for having chosen an OMNITRONIC BPM-6. If you follow the instructions given in this manual, we
can assure you that you will enjoy this device for many years.
Unpack your OMNITRONIC BPM-6.
Please make sure that there are no obvious transport damages. Should you notice any damages on the A/C
connection cable or on the casing, do not take the device into operation and immediately consult your local
dealer.

1.1 Features

Professional DSP Beatcounter
For connecting up to 6 CD-players or 3 CD-players and 3 turntables • Display of the BPMs per channel •
Beat Offset display for comparing 2 channels • Beat Offset channel selection via 2 selectors

2. SAFETY INSTRUCTIONS

This device has left our premises in absolutely perfect condition. In order to maintain this condition and to
ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning
notes written in this user manual.
Important:
Damages caused by the disregard of this user manual are not subject to warranty. The dealer will
not accept liability for any resulting defects or problems.
Always plug in the power unit least. Make sure that the power-switch is set to OFF position before you
connect the device to the mains.
Keep away from heaters and other heating sources!
OPERATING INSTRUCTIONS
Keep this device away from rain and moisture!
Never open the housing!
before you initial start-up.
CAUTION!
11/25 10453020_V_1_0.DOC