SICK IN4000 Standard Bedienungsanleitung Seite 82

en
Chapter 4
Fig. 5: Alignment
of the sensing
face on the
IN40-D0101K
safety switch
82
Mounting
a
c
e
• Fasten safety switch with the aid of a mounting
bracket at the selected mounting location, if possible
so that it cannot be detached, and fasten in the
selected position. Tighten self-locking screws to
1.0 Nm.
© SICK AG • Germany • All rights reserved
Operating Instructions
IN4000 Standard
b
d
f
8010934/ZWG9/2018-07-26
Subject to change without notice