Components; Technical Details; Recommended Accessories; Before You Start - Jamara Stinson Reliant Montageanleitung

Components

Technical Details

Wingspan app. 2180 mm
app. 72 qdm
Area
app. 1570 mm
L ength
Weight app. 5200 g (
Engine 2 Stroke 91er
4 Stroke 120er
RC 4 Channel 6 Sevos
Items Required to Complete the Kit
These instructions show how to build the model using the following original JAMARA items.
Engine mount
Vibration reducer
Fuel filler valve
Switch harness with charging socket
Engine Magnum XL-120
Glow plug conn.flight+rubber protection
Receiver battery

Building the Fuselage

1. Check that all of the parts are there and undamaged.
RTF )
Part No. 17 0770
Part No. 17 7336
Part No. 17 7648
Part No. 09 8953
Part No. 11 9814
Part No. 17 9220
Part No. 14 8042
- Pre-covered wooden fuselage
- pre-covered built up wings and tail plane
- GRP Cowl
- GRP Spats
- Fitting kit including wheels, tank, horns etc are included
in the kit
- Instructions
Rec. Acc.
Engine 2 Stroke XL-91AII SR
Engine 4 Stroke XL-120 AR FS
Servos 6 x QS-7
Receiver Compa DSX 8
Control horn without ball bearings
Control link
Solder extension
Skin thick
Epoxi Rapid 5 min. 100 g
Isaplast plastic adhesive L530
2. Screw the undercarriage together and fit the completed
unit to the fuselage.
3. To improve the appearance of the model, we recommend
that a piece of scrap balsa (template 1, page 17) be used
to cover the joint. Sand the balsa to shape and drill 2
7 mm holes and cover with matching foil. Glue the block
to the undercarriage using Cyno and L-530. If you wish
to remove the undercarriage, the holes can be cut free.
See Photo.
- 1 1 -
.
Part No. 1 1 9819
Part No. 11 9814
Part No. 03 3215
Part No. 06 1090
Part No. 17 7459
Part No. 17 7666
Part No. 17 7977
Part No. 23 6092
Part No. 23 6061
Part No. 23 0004