Ruris RX300S Bedienungsanleitung Seite 55

The underside of the lawnmower should be cleaned after each use to prevent clippings,
leaves, soil or other debris from collecting. If it accumulates, it will cause rusting and the
machine's performance will be affected.
● Disconnect the spark plug.
●
Empty the fuel from the tank.
●
Turn the machine over and rest it on the housing. Keep the air filter side up. Secure
the car well.
●
Clean the underside of the car with the right tools.
Knife removal, replacement, sharpening
Cuplaj
Lama
Surub Hex HD
● When removing the knife for sharpening or changing, protect your hands with a pair
of thick gloves when holding the knife.
●
Remove the HEX HD screw and washer that hold the knife.
Caution: Periodically inspect the knife adapter for cracks, especially if you
hit a hard object. Replace it when necessary.
When sharpening the knife follow the original angle of the edge as a reference point. It is
extremely important that each cutting part of the knife is equally sharpened to prevent the
knife from becoming unbalanced. An unbalanced blade will cause excessive vibration
when the engine revs. Before reinstalling the blade and blade adapter, lubricate the motor
shaft with oil. Be sure to install the blade with the numbered face down when the machine
is in the operating position.
Saiba lama
EN
23