Ruris RX300S Bedienungsanleitung Seite 56

●
Insert the blade adapter into the motor shaft.
●
Place the knife in the adapter. Make sure it is aligned and seated on the adapter.
●
Place the flat washer on the blade.
● Replace the Hex HD screw.
NOTE: To be sure that the machine is working well, the knife screw should be inspected
periodically ( tightness).
Roata
Emergency stop handle: Lubricate the pivot points of the stop handle at least once a
season with oil
Wheels: Lubricate the wheels at least once a season with oil (engine oil). If the wheels
are removed for any reason, lubricate the rear axle surface and the inner surface of the
wheel with oil.
The first 5 hours
Every 5 hours
Every 25 hours/6 months
24
Maneta stop motor
Motor
change oil
check the oil level
clean up the residue after use
check the air filter
clean the exhaust pipe
change the oil
check the spark plug
EN