Assembly; Commissioning - Ruris Rxe1500 Bedienungsanleitung

EN
5. THE ASSEMBLY
A1
1. Insert the handle into the machine body, making sure the hole in the handle is aligned with the hole in
the machine, then fix it with the included screws. (A1).
2. Attach the cable clip to the top handle (A2).
3. Fix the upper handle to the lower handle with nuts (A3).
4. Fix the cables using the supplied clamps.
5. Mount the collection bag (A4).
Cutting height adjustment
Warning: The blade continues to rotate for several seconds after the
machine has been stopped.
To obtain the desired cutting length, move the cutting height adjustment
lever (A5) forwards and backwards by one step.

6. COMMISSIONING

6.1 Connecting to the power source
Warning! Before connecting to the power source, make sure the switch is in the OFF position. Connect the
plug to a power source equipped with an RCD switch.
5