Technical Data; Overview Of The Machine - Ruris Rxe1500 Bedienungsanleitung

EN
l) Do not tilt the car when starting the engine;
m) Do not place hands or feet near or under rotating components.
n) Do not transport the machine while the power is on.
o) Switch off the machine and remove the plug from the socket. Make sure all moving parts are
completely stopped:
Whenever you leave the car.
Before removing blockages or unblocking the grass discharge channel.
Before checking, cleaning or any intervention on the device.
After hitting a foreign object. Check the machine for damage and carry out necessary repairs before
restarting and using the machine;
p) If the machine starts to vibrate abnormally, check it immediately:
check for damage
replace or repair any damaged components
check and tighten any loose parts
Never operate the machine with defective guards or without safety devices, for example without the
collector bag in place.
Start the engine carefully, following the instructions and keeping your feet away from the rotating parts.
1. Top handle
2. Lower handle
3. On/off switch panel
4. Collector bag
5. Wheels
6. Engine cover
7. Handle tightening nut
8. Support for power cable
9. Carrying handle
10. Cutting height adjustment lever
The images are informative, the supplier reserves the right to make structural and functional
changes to the machine presented in this manual.
4

3. TECHNICAL DATA

Cutting height
Speed
Cutting width
Power
Voltage/Frequency
Net weight with accessories
Gross weight
Guarantee
Collector bag volume
Handle type

4. OVERVIEW OF THE MACHINE

3 steps: 25-75 mm
3300 rpm
370 mm
1500W
230 /240V – 50 Hz
9.75 kg
11.2 kg
24 months
35 l
pliable