Resetting To Default Settings - Silvercrest STSK 3 A1 Bedienungs- Und Sicherheitshinweise

You may need to approve the connection on the
communication device . Refer to the communication devices'
instructions for use for more information on this topic .
˜ Resetting to default settings
To reset the headphones to the default settings, follow below
steps:
Disconnect the left and the right headphone
playback device:
Remove one of the headphones (left or right) from the
–
charging/storage box
Within 2 seconds, press the MF button
the LED
removed headphone back into the charging/storage box
to complete the reset .
Remove the other headphone from the charging/storage
–
box .
[ 6 ]
Within 2 seconds, press the MF button
–
LED
5 ] [
Insert the previously removed headphone back into the
–
charging/storage box
Both headphones
54 GB/IE
briefly flashes red/white . Insert the previously
5 ] [
briefly flashes red/white .
are now successfully reset .
1 ] [
.
6 ] [
.
6 ] [
from a
1 ] [
3 times until
4 ] [
3 times until the
4 ] [