Each Other; With A Bluetooth Device - Silvercrest Stsk 3 A1 Bedienungs- Und Sicherheitshinweise

˜ Pairing the headphones to

each other

To hear sound through both headphones in stereo, they must be
paired to each other .
When you remove the headphones from the charging
ports , they automatically pair .
7 ] [
If the headphones do not pair to each other, reset them to the
default settings (see "Resetting to default settings") .
When the headphones are paired to each other and
are awaiting connection to a Bluetooth device, the left
headphone flashes red / white and the right headphone
white only .
˜ Pairing the headphones

with a Bluetooth device

Remove the headphones from the charging ports
When the headphones are ready to pair, the indicator LED
flashes red/white .
NOTE: If the headphones have already been paired to each
other, the right headphone is already connected to the left
and flashes white only .
On your Bluetooth device, search for the device named
STSK 3 A1 and pair with the device . If your Bluetooth
device prompts you to enter a password, enter 0000 .
Once the connection has been established, the LED flashes
white .
NOTE: Your communication device must support Bluetooth
Standard 5 .0 to use all options .
.
7 ] [
®
GB/IE 53