Operation - WIK 9129 Bedienungsanleitung

Text GB TWINTOP 23.05.2005
Operating the appliance for
the first time
FIG. 1
Thoroughly clean the cooking plate (a/e)
and the tray (f) before they are used for the
first time. The grilling and frying plates can
be cleaned in a dishwashing machine (1).
Danger of electric shock!
Never put the thermostatic plug (c )
with the mains cable into the
dishwashing machine.

Operation

FIG. 2 – 9
Preparing the unit
The unit can be used in two ways.
The grilling plate (e) with the grooved
surface is suitable for the typical grilling of
steaks, cutlets or the like.
The frying plate (a) with the smooth
surface is used to fry shellfish, eggs, sliced
vegetables or the like.
Pull out the tray from the unit (2).
●
Select the relevant plate for the cooking
●
process and turn it to face upwards (3).
Push the tray below the plate into the slot
●
provided for it (4).
☛
Note
Allow enough space between the wall
and the unit to allow air to circulate
better.
Danger of burns due to hot unit parts
or hot fat!
Only touch the unit at the special
handles.
Before turning the unit over, first pull
the tray out of the unit (2).
13:10 Uhr Seite 13
Switching on the unit
Plug the thermostatic plug (c) into the unit
●
socket until it clicks. Connect the unit to
the mains (5).
Set the temperature regulator to the
●
desired temperature level (6).
The heater indicator light stays on for as
long as the heater is in operation.
☛
Note
As a result of the production process, a
small amount of smoke may be given
off the first time the unit is used.
The heating-up time is around 4-6 minutes,
depending on the temperature level that
was set. Once the desired temperature has
been reached, the heating indicator light
goes out. Then the grilling plate or frying
plate can be filled with food for cooking (7).
☛
Note
The heating indicator light comes on in
each heating-up phase until the
temperature has been reached.
Temperature regulator
The temperature regulator (d) is used to
vary the temperature of the cooking plate.
☛
Tip
If you wish to use the highest
temperature set the temperature to
"MAX" and allow the heating indicator
light to come on and go out several
times. This produces a more even
temperature for the cooking plate.
Temperature levels
MIN Ready for operation
1 to 2 Low temperature
3 to 4 Medium temperature
5 to 6 High temperature
MAX Max. temperature
13