Appliance Specifications; For Your Safety; Parts Of The Appliance - WIK 9129 Bedienungsanleitung

Text GB TWINTOP 23.05.2005
GB

Appliance specifications

TWIN TOP
Name:
Model no.:
Voltage:
Power rating:
Heating system: Contact heater
Cord set:
Size (overall)
L x W x D:
Grill area 2 x
L x W:
Weight:
Protection class: I
Humidity
protection class: IPX 4
Interference suppression: this appliance has
been interference-suppressed in accordance
with the interference-suppression directives.
Electromagnetic compatibility: this
appliance has been suppressed in accor-
dance with the EMC (electromagnetic com-
patibility) directives.

Parts of the appliance

a Non-stick frying plate
b Insulated handles
c Thermostatic plug with heating
indicator light
d Temperature control knob
e Non-stick grilling plate
f Tray
g Wooden spatula
13:10 Uhr
Electro-Grill, useable
either side, with
adjustable temperature
regulator
9129
230 VAC ~ / 50 - 60 Hz
2000 Watt
max. 1.1 m
500 x 300 x 90 mm
390 x 295 mm
approx. ca. 4.7 kg
Seite 11

For your safety!

The Instructions for Use contain important
notes on safety and the information requi-
red for proper operation of the appliance!
Read the instructions in full, keep them in
a safe place and pass them on to any sub-
sequent owner.
All safety instructions are always intended
for your own safety!
Safety instructions when connecting the
appliance
This appliance complies with the
●
recognized rules of technology and the
pertinent safety regulations for electrical
appliances!
If the connecting cable of this appliance
●
becomes damaged, have it replaced only
by a repair workshop nominated by the
manufacturer, to prevent any danger.
The voltage of the power source must be
●
the same as specified on the rating plate!
● Connect the appliance only to AC current
and to a socket with earthing contact. Do
not pull the cable over sharp edges, clamp
it into place or allow it to hang down!
Keep the cable away from hot and damp
areas!
The appliance is rated at class IPX 4 for
●
protection against moisture and may also
be used outdoors in damp conditions.
Nonetheless, protect the power cable
against excessive moisture!
As additional protection, the installation
●
of a fault current protective device (RCD)
with a release current up to 30mA is
recommended. Ask your installer.
Only connect the thermostatic plug to the
●
appliance when it has been switched off
("MIN" position)!
The unit may only be used with a type
●
9129.. thermostatic plug!
11