Noise And Vibration Reference Values; Safety Labels; Basic Information; Use Of The Machine - Vari Cb-80 Bersetzung Der Originalbetriebsanleitung

2.2.2 Noise and vibration reference values

Description
Declared emission sound pressure level A at operator's work station
Declared sound power level A
Declared vibration total value of hand-arm transmitted vibration
Table 11: Sound and vibrations

2.2.3 Safety labels

The user must keep safety labels on the machine in legible condition and secure their replacement if damaged.
Location:
Combined sticker ( Fig. 27 ), which is glued
underneath the rear plastic cover on the
machine frame.
Sticker ( Fig. 29 ) on the right handle
control lever.
Sticker ( Fig. 28 ) on the left handle control
lever.
Table 12: Safety labels

2.3 Basic information

2.3.1 Use of the machine

Sweeping brush CB-80 is intended for cleaning flat, artificial finished surfaces
3 cm 46 .

It is prohibited to use the machine on roads of all classes, except for perpendicular crossing where it is allowed.

Before using the machine it is always necessary to check that the bristles of the cylinder sweeping brushes are
not damaging the surface of the area being swept!
The OR-80 dozer blade 47 can clear freshly fallen blanket of snow up to 10 cm high. For collecting debris we recommend using the BS-80
tipping collector 48 , while working in places where there is a danger of damage to property or injury to other people we recommend using
the AP-80 dust screen 49 .

Alternate use of the machine for a different purpose should be considered undesignated use!
Measured in accordance withČSN EN ISO 11201
42
43 In accordance ČSN EN ISO 3744
Measured in accordance withČSN EN ISO 20643
44
45 e.g. concrete or bituminous surface, concrete or granite pavement, floors from cast materials, etc.
46 In independence on the type of snow. While removing the snow a certain amount of it can get on the cleaned surface through the space behind the sweeping rollers. This is quite
normal and does not give a reason to claim a malfunction of the machine.
47 Separate accessories are available as optional extra and are not part of the basic equipment of the machine!
Separate accessories are available as optional extra and are not part of the basic equipment of the machine!
48
49 Separate accessories are available as optional extra and are not part of the basic equipment of the machine!
43 L
WA,d
Number: Description:
1 Read carefully through the user manual before using.
2 Disconnect the spark plug cables prior to undertaking repairs.
3 Avoid placing hands or feet in the blade operating area – risk of cutting.
Risk of injury from flying debris, shavings, ejected objects, etc. Keep persons and animals at a
4
safe distance from the machine.
5 Do not exceed the maximum permitted slope incline when operating the machine.
6 Use a protection of your eyes and hearing.
Drive activation of the work tool:
- 0 = work tool off
1 = work tool rotates
Engages the machine drive:
0
= drive off
-
1
= drive on
CB-80
42 L
(82+4) dB
pAd
(96+4) dB
44 a
(8,8+3,5) m.s
hv,d
45 covered with dirt or freshly fallen snow up to a height of
CB-80 CB-80B CB-80Z CB-80ZI
CB-80Z
CB-80B
CB-80ZI
(84+4) dB
(83+4) dB
(98+4) dB
(97+4) dB
-2 (9,7+3,9) m.s -2 (22+8,8) m.s -2
23