Silvercrest SHAZDB 29.6 A1 Bedienungsanleitung Seite 79

Switching the appliance on
1) Remove the vacuum cleaner from the wall bracket
using the wall bracket
socket
2) Press the On/Off switch
shows the battery indicator
and the operating mode
Note
► The appliance always starts in operating mode 1 Eco after being switched
on.
Selecting an operating mode
The appliance has three different operating modes, each of which differs in terms
of suction power and running time. Press the M
mode:
1 Eco
–
For vacuuming hard floors, delicate carpets and carpeting with low
soiling.
–
The appliance consumes less battery power and the running time is
therefore longer.
–
Running time with fully charged battery approx. 35 minutes.
2 Auto
–
For vacuuming hard floors and carpeting with light to medium soiling.
–
The brush speed is automatically adjusted depending on the floor
covering to optimise the running time.
–
Running time with fully charged battery approx. 20 minutes.
3 Boost
–
For vacuuming hard floors and carpeting with heavy soiling
–
Due to the high suction power, the best suction result is achieved with
a short running time.
–
Running time with fully charged battery approx. 10 minutes.
│ GB │ MT
■ 76
i , pull the barrel plug
3 on the underside of the appliance.
y
k
h
(1 Eco/2 Auto/3 Boost).
i
q out of the charging
to switch on the appliance. The display
with the remaining running time
x
button to select the operating
. When you are not
l
j
(timer)
SHAZDB 29.6 A1