Silvercrest SHAZDB 29.6 A1 Bedienungsanleitung Seite 75

4) Drill the marked holes with a 5-mm drill.
5) Push the supplied wall plugs
6) Place the wall bracket
bracket and accessories holder
7) You can put the crevice nozzle
combination brush
8) Connect the mains adapter
Getting started
Information about the battery
♦ The vacuum cleaner is powered by a rechargeable, replaceable lithium-ion
battery. Before using the vacuum cleaner for the first time, the battery
be charged for around 4-5 hours.
♦ To care for the battery
Disconnect the mains adapter
charged.
Note
► The appliance is equipped with a temperature monitor to protect the battery
At high ambient temperatures, the charging process may be interrupted or
the appliance may switch off automatically in rare cases:
–
The battery indicator
Charging is interrupted and automatically resumed as soon as the
temperature of the appliance has dropped.
–
The battery indicator
operation. The appliance switches off automatically. Allow the appliance
to cool down for about 20-30 minutes before switching it on again.
│ GB │ MT
■ 72
z
into the holes.
i
in the accessories holder
i/u
in place using the screws
e
, the round brush nozzle
w
on the accessories holder
0 to a mains socket.
2 , we recommend the following:
0 from the mains socket after the battery
k
flashes at one second intervals during charging.
k
flashes five times at one second intervals during
u
and screw the wall
t
provided.
r
and the 2-in-1
u
.
2
SHAZDB 29.6 A1
must
2 is
2
.