Abus RWM450 Bedienungsanleitung Und Wartungsanleitung Seite 44

For this see section: Setting up other
RISAs; Connection Mode and Creating
a Radio Group
If LED then lights red:
• Alarm is outside radio range of other
devices
• Indirect connection via repeating or
routing also not possible
• Time allowed for connection mode
has expired
If this occurs please check:
• Are other alarms still in connection
intervals) ?
• If not: see section "Extending the
Radio Group, Entering Connection
mode and Repeat Connection
Attempts".
Completing Setup of Radio Group
Setup of the radio group is automatically
the units' LEDs give any signal. Connec-
tion mode can also be ended immedi-
with the black activation pin on any
alarm within the group. This causes the
LEDs of all devices to go out.
Radio Group Function Test
Press and hold the Test/Stop button for
2-3 seconds to invoke a self-test on this
device:
Beep
Press for 2 – 3 seconds
Holding the Test/Stop button down
longer, until the second beep, issues
a radio signal that initiates a self-test
for all alarms within the radio group.
This test should be performed regularly,
every 3-6 months, to check the radio
group.
Beep
Press for 2 – 3 seconds
until second beep
– 44 –
1x
1x