7.2 Cleaning of the oven door
Clean the door very carefully.
Do not use any abrasive detergents; otherwise, you may damage or break the
glass.
Use wash-up liquid and warm water.
NOTICE! Do not scratch the glass.
7.3 Replacement of the illuminant
WARNING! Switch off the appliance and let it cool down completely.
Disconnect the appliance from the mains before maintenance (fuse box of
your household power supply)! RISK OF ELECTRIC SHOCK!
NOTICE! When you replace the illuminant, always use a clean cloth or
gloves. Never touch the new illuminant with your bare hands.
NOTICE! Never use a screwdriver to remove the cover. Remove the cover
by hand only! RISK OF DAMAGE!
1. Disconnect the appliance from the mains: switch off the corresponding
fuse in the fuse box of your household power supply!
2. Place a dishcloth in the interior of the cold oven to protect it from possible
damage.
3. Unscrew the lamp cover anticlockwise (s. fig. below). Clean the lamp cover and
wipe it dry thoroughly.
4. Unscrew the illuminant from the socket (s. fig. below) and replace it with a high
temperature illuminant (300 °C) of the same type. Do not use any other type of
illuminant.
~
~
81