Removing The Transport Support - Electrolux SG215N Benutzerinformation

8.3 Location
To ensure best performance, if the
appliance is positioned below an
overhanging wall unit, the minimum
distance between the top of the cabinet
and the wall unit must be at least 40 mm.
Ideally, however, the appliance should
not be positioned below overhanging wall
units.
The ventilation space can be:
• directly above the appliance
• behind and above the top cupboard.
In this case, the space behind the top
cupboard must be at least 50 mm
deep.
8.4 Electrical connection
• Before plugging in, ensure that the
voltage and frequency shown on the
• The appliance must be earthed. The
• The manufacturer declines all
• This appliance complies with the
8.5 Removing the transport
support
Your appliance is equipped with
transport support to secure the door
during transportation.
1. Open the door.
2. Remove the transport support from
3. Remove the transport support from
50 mm
8.6 Levelling
When placing the appliance ensure that
it stands level. If necessary adjust the
feet using the adjustment spanner
rating plate correspond to your
domestic power supply.
power supply cable plug is provided
with a contact for this purpose. If the
domestic power supply socket is not
earthed, connect the appliance to a
separate earth in compliance with
current regulations, consulting a
qualified electrician.
responsibility if the above safety
precautions are not observed.
E.E.C. Directives.
the door sides.
the lower hinge (some models).
CAUTION!
Some models are fitted with
a silencing pad under the
cabinet. Do not remove this
pad.
3
ENGLISH 15
2