Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EX-61008
7. Server Settings
4. Operation mode
Set up the desired operating mode of the serial interfaces.
5. Device Management
Firmware Upgrade
Restore Factory
Port Restart
System Restart
© Copyright 2023 by EXSYS Vertriebs GmbH. All rights reserved
Installing new device firmware.
Select the locally stored installation package of the new firmware and click on "Start"
to perform the upgrade.
Attention! During the upgrade, the device server must always be connected to the
network and to the power supply, otherwise the device may be destroyed.
We cannot accept any responsibility for incorrectly executed updates.
Resetting the unit to factory defaults
Restarting individual ports (e.g. in case of a malfunction)
Reboot the serial device server
27
English
Werbung
