Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Color fading
Sound controlled mode
LEDs on/off
ON OFF
Fade
Auto mode
Auto
Sound
-
Speed
Speed
R
G
RG
RB
W
RGB
Switching the LEDs On and Off
The LEDs can be switched on and off with the button
however. After switching on, the LEDs light up according to the last control program selected.
Constant Lighting in One Color
For constant lighting of all LEDs in one color, press the corresponding color button (R, G, B, RG, RB, GB, W,
RGBW).
Choosing a control program
You can choose the desired program via the corresponding buttons. Speed and fine control can be selected
-
+
via the
and
buttons.
Button
Fade
Color fading; intensity adjustable via -/+ buttons. 10 levels are available.
Auto
Auto program; speed adjustable via Speed and -/+ buttons. 10 levels are available.
Sound
Sound control; sensitivity via M and -/+ buttons. 32 levels are available.
Flash
Strobe effect; speed adjustable via Speed and -/+ buttons. 10 levels are available.
Speed
Speed adjustment in Auto and Flash modes.
M
Sensitivity adjustment in Sound mode.
CLEANING AND MAINTENANCE
The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tightly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
M
Sensitivity
Flash
Strobe effect
„-/+" for adjusting control
+
program settings
B
GB
Color buttons
RGBW
Control programs with variable settings
. The control unit remains switched on,
ON OFF
15/16
00082026, Version 1.0
Werbung
Inhaltsverzeichnis
