Setting The Security Code - Sony CDX-M8800 Bedienungsanleitung

Setting the security code

This unit has a security function to discourage
theft. Input a 4 digit number as your security
code.
If you set it, you need to input the stored code to
turn on the unit should you re-install the unit in
another car or after changing the battery.
1
Press (SOURCE).
2
Press (MENU).
3
Press M or m repeatedly to select
"Security."
4
Press (ENTER).
Code Set display appears.
1 Press M or m repeatedly to enter the
first digit (0-9).
2 Press , to move the cursor to the
2nd digit, then press M or m
repeatedly to enter the 2nd digit.
Each time you press M, a digit goes up and
each time you press m, a digit falls.
3 Repeat step 2 to enter the 3rd digit
and the 4th digit.
5
Press (ENTER).
Check Code display appears.
6
Press M or m repeatedly to select
"YES."
7
Press (ENTER).
The display returns to the normal display.
Notes
• The security code cannot be entered by the number
buttons (1-6).
• Make sure not to forget your security code.
• If you select "NO" in step 6 and press (ENTER), the
display returns to the Code Set display in step 4.
28
After the security code setup is
completed
Should you re-install the unit in another car or
change the battery, the Check Code display
appears after turning on the unit. Enter your
stored 4-digit code with M/m/,, and press
(ENTER).
Code Input display
OK: returns to the clock display.
NG: "Code Error" appears.
Input the correct code using M/m/,.
Cancelling the security code
Repeat step 1 to 4 in "Setting the security code"
(Code Del display appears). Enter your stored
code with M/m/,, and press (ENTER).
Code Del display
OK: "Complete" appears and returns to the
normal display.
NG: "Code Error" appears.
Input the correct code using M/m/,.
Note
You cannot change the security code unless you
delete your stored code.
Tip
If the security code is not stored, the Code Del display
does not appear.