Receiving The Stored Stations; Storing Only The Desired Stations - Sony CDX-M8800 Bedienungsanleitung

Receiving the stored stations

1
Press (SOURCE) repeatedly to select
the radio.
2
Press (MODE) repeatedly to select the
band.
3
Press the number button ((1) to (6))
on which the desired station is stored.
Tip
Press M or m to receive the stations in the order they
are stored in the memory (Preset Search function).
If preset tuning does not work
Press < or , to search for the
station (automatic tuning).
Scanning stops when the unit receives a
station. Repeat until the desired station is
received.
Tips
• If automatic tuning stops too frequently, turn on the
Local Seek to limit seek to stations with stronger
signals. For details, see "Changing the sound and
display settings" on page 24.
• If you know the frequency of the station you want to
listen to, press and hold < or , to locate the
approximate frequency, then press < or ,
repeatedly to fine adjust to the desired frequency
(manual tuning).
If FM stereo reception is poor
Select monaural reception mode
For details, see "Changing the sound and
display settings" on page 24.
The sound improves, but becomes monaural
("ST" disappears).
Tip
If FM broadcasts are difficult to hear, set DSO to
"OFF" (page 26).
16
Storing only the desired
stations
You can manually preset the desired stations on
any chosen number button.
1
Press (SOURCE) repeatedly to select
the radio.
2
Press (MODE) repeatedly to select the
band.
3
Press < or , to tune in the station
that you want to store.
4
Press the desired number button ((1)
to (6)) for 2 seconds until the preset
number appears.
Note
If you try to store another station on the same number
button, the previously stored station will be erased.